SCL-7
2-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker
The SCL-7 is the smallest traditional in-wall model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a width or surround channel or as an LCR in smaller systems. The SCL-7 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with two 5.25-inch (130 mm) Advanced Aluminum Matrix cone cast-frame woofers into a precision molded baffle assembly. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 45 degrees from the listening position. The SCL-7 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small to medium rooms.
PATENTED 2410H-2 1-INCH (25MM) COMPRESSION DRIVER
PATENTED HIGH-DEFINITION IMAGING HORN GEOMETRY
DUAL 5.25-INCH (130MM) CAST-FRAME, ADVANCED ALUMINUM MATRIX CONE WOOFERS
Advanced Crossover Network
16 XLR Balanced and 16 RCA UnbalaGold-plated Spring-loaded Binding Post Input Terminalsnced Analog Outputs
Zero-bezel, Magnetically-attached Paintable Grille
Molded Baffle with Patented Cat Claw Installation Mechanism
SPECIFICATIONS
Type
2-Way In-wall loudspeaker
High Frequency Driver
1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver
Impedance
4 Ohm
Frequency Response
55Hz - 30kHz (-6 dB on-axis), 2pi anechoic
High Frequency Coverage Angle (-6 dB)
60° Vertical, 90° Horizontal (Left
Controls
Boundary Proximity Control
Product Dimensions (with grille)
7.32” (186 mm) x 19.15” (486 mm) x 3.88” (99 mm)
Rough-in Bracket
WB52
Input Type
Gold-plated spring-loaded binding posts
Shipping Weight
14.6 lbs (6.62 kg)
Warranty
5 Years
Low Frequency Driver
Two 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofers (JW13Al-4)
Recommended Amplifier Power
25 – 150W RMS
Loudspeaker Sensitivity
88 dB/2.83V/1m (2pi anechoic)
Crossover Frequency
2.0 kHz
Enclosure Type
Open back
Grille Dimensions
7.32” (186 mm) x 19.15” (486 mm)
Cut-out Dimensions
6.18” (157 mm) x 18.03” (458 mm)
Mounting Depth
3.64” (93 mm)
Product Weight
12.6 lbs (5.72 kg)
Shipping Units of Measure
Each
