SDA-1700
Class D Subwoofer Amplifier
The SDA-1700 is a custom amplifier solution, optimized for the highest level of performance and reliability. This rackmount amplifier includes user features on the front panel, and a custom installer focused feature set on the rear panel. As part of JBL Synthesis custom in-wall subwoofer system, this rack mountable Class D component is designed to power the SSW-4 in-wall subwoofer.
CONNECT UP TO TWO SSW-4 SUBWOOFERS WITH EACH SDA-1700 AMPLIFIER
2 EQ MODES (CUSTOMIZED FOR IN-WALL SUBWOOFERS)
USER-ADJUSTABLE SINGLE-BAND PEQ – ROOM EQUALIZATION
Low distortion and low noise
Two dual-banana output connectors for easy connection
Short-circuit, over-current protection and over-temperature compensation
Automatic signal sensing Turn-On and Turn-Off
Add Your Heading Text Here
Rated Output Power (RMS) into the minimum impedance of 4 Ohms
700Watts
Rated impedance
8Ohms per speaker output
Model-Specific EQ 1
Only for JBL SYNTHESIS SSW-4
Input Sensitivity to 1W @ 50Hz
16.3mVrms +/- 1dB (Single input driven) Gain=41.7dB
Input Impedance
> 10K Ohms
Auto Turn On Input Sensitivity @ 50Hz
Typical 10mV
THD+N at Rated Output Power
< 1%
Minimum AC Mains power requirements
100-120VAC-50-60Hz Model
Height
3.50in (88.90mm)
Depth
11.04in (280.3mm)
Peak power
1500W
Minimum load impedance
4Ohms
Model-Specific EQ 2
Only for JBL C82W
Input Overload (Both inputs driven)
≥ 2.0Vrms
Low Pass Crossover range
50-150Hz
THD+N at 1W
< 0.3%
Signal-to-Noise ratio to 1W
> 65dBA
Power consumption (Standby)
0.5W
Width
17in (431.8 mm)
Weight
14Lb (6.35Kg)
