SCL-5
Two-way 7-inch (180mm) In-Ceiling Loudspeaker
The SCL-5 is the highest performance traditional round in-ceiling model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as a height channel or in-ceiling LCR or surround channel loudspeaker. The SCL-5 features JBL’s patented 2409H 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with an angled 7-inch (180mm) Advanced Aluminum Matrix cone cast-frame woofer operating behind an acoustic aperture waveguide. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 60 degrees from the listening position. The SCL-5 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in medium to large rooms.
PATENTED 2409H 1-INCH (25MM) COMPRESSION DRIVER
PATENTED HIGH-DEFINITION IMAGING HORN GEOMETRY
7-INCH (180MM) CAST-FRAME, ADVANCED ALUMINUM MATRIX CONE WOOFER
Advanced Crossover Network
Gold-plated Spring-loaded Binding Post Input Terminals
Zero-bezel, Magnetically-attached Paintable Grille
Molded Baffle with Patented Cat Claw Installation Mechanism
SPECIFICATIONS
Type
2-Way In-ceiling loudspeaker
High Frequency Driver
1" (25 mm) 2409H Teonex annular ring-diaphragm compression driver
Impedance
6 Ohm
Frequency Response
48Hz - 32kHz (-6 dB on-axis), 2pi anechoic
High Frequency Coverage Angle (-6 dB)
60-degree Vertical (Up
Controls
Boundary Proximity Control
Grille Dimensions
Square - 12.5" (318 mm) x 12.5" (318 mm)
Cut-out Diameter
11.2" (285 mm)
Mounting Depth
5.58" (141.8 mm)
Product Weight
8.6 lb. (3.9 kg), 9.2 lb. (4.2 kg) with one grille
Shipping Units of Measure
Each
Low Frequency Driver
7” (180 mm) advanced Aluminum Matrix cone cast-frame woofer (JW180PB-6)
Recommended Amplifier Power
25 – 125W RMS
Loudspeaker Sensitivity
86 dB/2.83V/1m (2pi anechoic)
Crossover Frequency
1575 Hz
Enclosure Type
Open back
Grille Dimensions
Round - 12.5" (318 mm) diam.
Product Dimensions (with grille)
12.5" H x 12.5" W x 5.98" D (318 mm x 318 mm x 151.9 mm)
Accessory Rough-in Bracket
CB10
Input Type
Gold-plated spring-loaded binding posts
Shipping Weight
12.5 lb. (5.7 kg)
Warranty
5 Years
2-way in-ceiling loudspeaker system
Yes
D2-derived 1-inch / 25mm D2409H annular ring, Teonex® diaphragm compression driver
Yes
Retractable Cat Claws mounting system for easy installation
Yes
Rotatable, angled baffle
Yes
Sealed / acoustic suspension design
Yes
Zero-bezel, magnetically attached round and square grilles
Yes
6.5-inch (165mm) Cast-frame, advanced aluminum matrix Cone with low-distortion neodymium motor structure
Yes
High-Definition Imaging (HDI™) waveguide
Yes
Hi Frequency Level and Boundary Compensation switches
Yes
Metal back can be integrated with system
Yes
Gold plated, spring-loaded, push type binding post terminals
Yes
