SCL-3
Two-way 5.25-inch (130mm) In-Wall Loudspeaker
The SCL-3 is a custom in-wall loudspeaker designed primarily for use as an LCR behind projection screens or as a height channel in ceiling applications. It features JBL’s patented 2409H 1-inch (25mm) compression driver mated to a High-Definition Imaging (HDI™) horn. Dual 5.25-inch (130mm) Advanced Aluminum Matrix cone cast-frame woofers provide detailed and dynamic response with low distortion. The integrated MDF enclosure is designed for installation in standard 2×6 wood frame construction, and Internal connections allow for bi-wiring or bi-amplification in advanced installations. The SCL-3 is ideal for use in medium to large rooms.
PATENTED 2409H 1-INCH (25MM) COMPRESSION DRIVER
PATENTED HIGH-DEFINITION IMAGING HORN GEOMETRY
DUAL 5.25-INCH (130MM) CAST-FRAME, ADVANCED ALUMINUM MATRIX CONE WOOFERS
Advanced Crossover Network with Bi-wire/Bi-amp Capability
Dual Gold-plated Spring-loaded Binding Post Input Terminals
Zero-bezel, Magnetically-attached Paintable Grille
Molded Baffle with Integrated MDF Enclosure and Isolation Mounting System
SPECIFICATIONS
Speaker Type
Two-way In-Wall Loudspeaker
Mid/High Frequency Transducer
D2-derived 1" (25mm) 2409H annular ring, Teonex® diaphragm compression driver
Frequency Response (-6dB on-axis)
65 Hz – 33KHz
Sensitivity (2.83V@1m)
91dB
Crossover Frequencies
1.3 KHz
Inputs
Dual Gold-plated Five-way Binding Posts
Weight
24.3 lb (11.02 kg)
Low Frequency Transducer
Dual 5-¼” (130mm) cast-frame, advanced aluminum matrix cone woofers
Maximum Recommended Amplifier Power
200 watts RMS
Coverage area (-6dB @ 20 KHz)
90 x 60 deg, (-6dB @ 10 KHz)
Nominal Impedance
6 Ohm
Enclosure type
Sealed In-Wall Mount with included back box
Dimensions (H x W x D)
16.46" x 16.46" x 6.01" (418mm x 418mm x 153mm)
Finishes
Matte Black
