SDA-8300
8-channel Bridgeable Class D Amplifier
The SDA-8300 is a versatile 8-channel Class D power amplifier designed to deliver maximum power while taking up minimal rack space. Each channel is rated to deliver 300W into 8 ohms and adjacent channel pairs can be bridged to deliver 600W into 8 ohms. This flexible channel configuration makes this an ideal amplifier to power LCR, surround, and height channel loudspeakers as well as in-wall subwoofers in JBL Synthesis immersive audio systems. Powerful built-in DSP allows for custom loudspeaker tuning and full external control allows for complete and easy system integration.
300WPC INTO 8 OHMS, 600W INTO 8 OHMS BRIDGED CHANNEL PAIRS
BALANCED AND UNBALANCED ANALOG INPUTS VIA PHOENIX TERMINAL BLOCK CONNECTORS
HDBLU-LINK DIGITAL AUDIO NETWORKING
Barrier Strip Speaker Terminals
High-efficiency Internal Cooling Fans
Advanced Digital Signal Processing with Limiters, Delays, and Additional Control
SPECIFICATIONS
Cooling
Continuously variable speed forced air, front to back airflow
Required AC Mains (±10%)
100Vrms - 240Vrms ~50/60Hz
Maximum Fan Noise (dBA SPL @ 1M)
47
Rated Output Power Into 8 Ohms
300W
Rated Output Power Into 2 Ohms
150W
High Impedance
70-Volt & 100-Volt Capable
Analog Input Signal to Noise Ratio
104 dB
Total Harmonic Distortion (at full rated power, 20Hz - 20kHz)
0.35%
Input Impedance (nominal balanced, unbalanced)
10kΩ, 5kΩ
Load Impedance Stereo/Dual Mode
2Ω - 16Ω; 70Vrms and 100Vrms
Rated Output Power Into 4 Ohms
300W
Bridged Output Power Into 8 Ohms
600W
Frequency Response (8Ω, 20Hz - 20kHz)
±0.25dB
BLU link Input Signal to Noise Ratio (A-Weighted)
>108dB
Damping Factor (20Hz to100Hz)
>1000
Maximum Input Level before Compression (Low Gain Mode)
(+)20dB
Load Impedance Bridge Mono
4Ω - 16Ω; 140Vrms and 200Vrms
Width
19 in. (48.3 cm)
Depth
14.25 in. ( 35.63 cm)
Height
3.5 in. (8.9 cm)
Weight
23.5lbs (10.66kg)
Eight balanced line inputs
6-pin block connectors (Two channels per block connector)
BLU link Input/Output
RJ-45 (Category 5e)
Programmable General Purpose Input/Output Ports
" 3-pin block connector (Enables SLEEP mode and monitoring of AMP STATUS)"
Eight speaker level outputs
Terminal strip (accepts up to 10AWG wire)
Ethernet
RJ-45 (Category 5e)
Power Connector
15A IEC
